Always Query A Zone With Original Alias (No Transforms); Query A Zone For A Transformed Alias - Cisco TelePresence Administrator's Manual

Dial plan and call processing
Field Value
Pattern behavior Leave
On successful match Stop
Target Sales office
State Enabled

Always query a zone with original alias (no transforms)

To configure a zone so that it is always sent search requests using the original alias, from the
rule page (Configuration > Dial plan > Search rules >
Mode of Any alias:
Field Value
Rule name Always query with original alias
Description Send search requests using the original alias
Priority 100
Source Any
Request must be No
authenticated
Mode Any alias
On successful match Continue
Target Head office
State Enabled

Query a zone for a transformed alias

Note that the Any alias mode does not support alias transforms. If you want to always query a zone using a
different alias to that received, you need to use a mode of Alias pattern match in combination with a regular
expression.
You may want to configure your dial plan so that when a user dials an alias in the format
name@example.com the VCS queries the zone for name@example.co.uk instead.
To achieve this, from the
up a search rule as follows:
Field Value
Rule name Transform to example.co.uk
Description Transform example.com to example.co.uk
Priority 100
Source Any
Cisco VCS Administrator Guide (X8.1.1)
Create search rule page
New), set up a search rule for that zone with a
(Configuration > Dial plan > Search rules >
Example searches and transforms
Create search
New) set
Page 183 of 507