Cisco TelePresence Administrator's Manual page 237

Applications
cluster.
The alias generated by the Template must be a fully-qualified SIP alias and must route to the MCU. The
n
MCU must be configured to process this alias. No other special configuration is required on the MCU in
order to support the Conference Factory application.
SIP mode must be set to On
n
to function. If you want to be able to initiate calls to the Conference Factory from H.323 endpoints, you
must also set H.323 mode to On
interworking mode is set to Registered only or On
See Cisco TelePresence Multiway Deployment Guide
components of your network (endpoints, MCUs and VCSs) in order to use Multiway in your deployment.
Cisco VCS Administrator Guide (X8.1.1)
(Configuration > Protocols >
(Configuration > Protocols >
(Configuration > Protocols >
for full details on how to configure individual
Configuring Conference Factory
SIP) for the Conference Factory application
H.323), and ensure that H.323 <-> SIP
Interworking).
Page 237 of 507