Cisco TelePresence Administrator's Manual page 436

Reference material
Command reference — xConfiguration
IPProtocol: <Both/IPv4/IPv6>
Selects whether the VCS is operating in IPv4, IPv6 or dual stack mode. You must restart the system for any changes to take effect.
Default: IPv4.
Example: xConfiguration IPProtocol: IPv4
Language Default: <S: 0, 128>
The default language used on the web interface. Default: "en_US".
Example: xConfiguration Language Default: "en_US"
Log Level: <1..4>
Controls the granularity of Event Logging. 1 is the least verbose, 4 the most. Note: this setting is not retrospective; it determines which
events are written to the Event Log from now onwards. Default: 1
Example: xConfiguration Log Level: 1
Logger Network [1..n] Level: <FATAL/ERROR/WARN/INFO/DEBUG/TRACE>
The logging level for the nominated module. Default : INFO.
Example: xConfiguration Logger Developer 1 Level: INFO
Login Remote LDAP BaseDN Accounts: <S: 0,255>
Sets the Distinguished Name to use as the base when searching for administrator and user accounts.
Example: xConfiguration Login Remote LDAP BaseDN Accounts: "ou=useraccounts,dc=corporation,dc=int"
Login Remote LDAP BaseDN Groups: <S: 0,255>
Sets the Distinguished Name to use as the base when searching for administrator and user groups.
Example: xConfiguration Login Remote LDAP BaseDN Groups: "ou=groups,dc=corporation,dc=int"
Login Remote LDAP CRLCheck: <None/Peer/All>
Specifies whether certificate revocation lists (CRLs) are checked when forming a TLS connection with the LDAP server. CRL data is
uploaded to the VCS via the trusted CA certificate PEM file. Default: None.
None: no CRL checking is performed.
Peer: only the CRL associated with the CA that issued the LDAP server's certificate is checked.
All: all CRLs in the trusted certificate chain of the CA that issued the LDAP server's certificate are checked.
Example: xConfiguration Login Remote LDAP CRLCheck: Peer
Login Remote LDAP DirectoryType: <ActiveDirectory>
Defines the type of LDAP directory that is being accessed. Default: ActiveDirectory.
ActiveDirectory: directory is Windows Active Directory.
Example: xConfiguration Login Remote LDAP DirectoryType: ActiveDirectory
Login Remote LDAP Encryption: <Off/TLS>
Sets the encryption to use for the connection to the LDAP server. Default: TLS.
Off: no encryption is used.
TLS: TLS encryption is used.
Example: xConfiguration Login Remote LDAP Encryption: Off
Login Remote LDAP SASL: <None/DIGEST-MD5>
The SASL (Simple Authentication and Security Layer) mechanism to use when binding to the LDAP server. Default: DIGEST-MD5.
None: no mechanism is used.
DIGEST-MD5: The DIGEST-MD5 mechanism is used.
Example: xConfiguration Login Remote LDAP SASL: DIGEST-MD5
Cisco VCS Administrator Guide (X8.1.1) Page 436 of 507