Cisco TelePresence Administrator's Manual page 450

Reference material
Command reference — xConfiguration
Transform [1..100] Pattern Replace: <S: 0, 60>
The text string to use in conjunction with the selected Pattern behavior.
Example: xConfiguration Transform 1 Pattern Replace: "example.com"
Transform [1..100] Pattern String: <S: 0, 60>
The pattern against which the alias is compared.
Example: xConfiguration Transform 1 Pattern String: "example.net"
Transform [1..100] Pattern Type: <Exact/Prefix/Suffix/Regex>
How the pattern string must match the alias for the transform to be applied. Default: Prefix.
Exact: the entire string must exactly match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string is treated as a regular expression.
Example: xConfiguration Transform 1 Pattern Type: Suffix
Transform [1..100] Priority: <1..65534>
Assigns a priority to the specified transform. Transforms are compared with incoming aliases in order of priority, and the priority must
be unique for each transform. Default: 1 .
Example: xConfiguration Transform 1 Priority: 10
Transform [1..100] State: <Enabled/Disabled>
Indicates if the transform is enabled or disabled. Disabled transforms are ignored.
Example: xConfiguration Transform 1 State: Enabled
Traversal Media Port End: <1025..65533>
For traversal calls (where the VCS takes the media as well as the signaling), specifies the upper port in the range to use for the media.
Ports are allocated from this range in pairs, the first of each being even. Thus the range must end with an odd number. Default:
59999 .
Example: xConfiguration Traversal Media Port End: 59999
Traversal Media Port Start: <1024..65532>
For traversal calls (where the VCS takes the media as well as the signaling), specifies the lower port in the range to use for the media.
Ports are allocated from this range in pairs, the first of each being even. Thus the range must start with an even number. Default:
36000 .
Example: xConfiguration Traversal Media Port Start: 36000
Traversal Server H323 Assent CallSignaling Port: <1024..65534>
The port on the VCS to use for Assent signaling. Default: 2776 .
Example: xConfiguration Traversal Server H323 Assent CallSignaling Port: 2777
Traversal Server H323 H46018 CallSignaling Port: <1024..65534>
The port on the VCS to use for H460.18 signaling. Default: 2777 .
Example: xConfiguration Traversal Server H323 H46018 CallSignaling Port: 2777
Traversal Server TURN Authentication Realm: <S: 1,128>
The realm sent by the server in its authentication challenges. Default: TANDBERG .
Example: xConfiguration Traversal Server TURN Authentication Realm: "TANDBERG"
Cisco VCS Administrator Guide (X8.1.1) Page 450 of 507