Cisco TelePresence Administrator's Manual page 457

Reference material
Command reference — xConfiguration
Zones Policy SearchRules Rule [1..2000] Pattern Type: <Exact/Prefix/Suffix/Regex>
How the pattern string must match the alias for the rule to be applied. (Applies to Alias Pattern Match mode only.) Default: Prefix.
Exact: the entire string must exactly match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string is treated as a regular expression.
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Type: Suffix
Zones Policy SearchRules Rule [1..2000] Priority: <1..65534>
The order in the search process that this rule is applied, when compared to the priority of the other search rules. All Priority 1 search
rules are applied first, followed by all Priority 2 search rules, and so on. Default: 100 .
Example: xConfiguration Zones Policy SearchRules Rule 1 Priority: 100
Zones Policy SearchRules Rule [1..2000] Progress: <Continue/Stop>
Specifies the ongoing search behavior if the alias matches this search rule. If 'stop' is selected, any rules with the same priority level as
this rule are still applied. Default: Continue.
Continue: continue applying the remaining search rules (in priority order) until the endpoint identified by the alias is found.
Stop: do not apply any more search rules, even if the endpoint identified by the alias is not found in the target zone.
Example: xConfiguration Zones Policy SearchRules Rule 1 Progress: Continue
Zones Policy SearchRules Rule [1..2000] Protocol: <Any/H323/SIP>
The source protocol required for the rule to match.
Example: xConfiguration Zones Policy SearchRules Rule 1 Protocol: Any
Zones Policy SearchRules Rule [1..2000] Source Mode: <Any/AllZones/LocalZone/Named>
The sources of the requests for which this rule applies. Default: Any.
Any: locally registered devices, neighbor or traversal zones, and any non-registered devices.
All zones: locally registered devices plus neighbor or traversal zones.
Local Zone: locally registered devices only.
Named: A specific Zone or SubZone.
Example: xConfiguration Zones Policy SearchRules Rule 1 Source Mode: Any
Zones Policy SearchRules Rule [1..2000] Source Name: <S: 0..50>
The name of the source (Sub)Zone for which this rule applies.
Example: xConfiguration Zones Policy SearchRules Rule 1 Source Name: "Local Office"
Zones Policy SearchRules Rule [1..2000] State: <Enabled/Disabled>
Indicates if the search rule is enabled or disabled. Disabled search rules are ignored. Default: Enabled .
Example: xConfiguration Zones Policy SearchRules Rule 1 State: Enabled
Zones Policy SearchRules Rule [1..2000] Target Name: <S: 0,50>
The zone or policy service to query if the alias matches the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Target Name: "Sales Office"
Zones Policy SearchRules Rule [1..2000] Target Type: <Zone/PolicyService>
The type of target this search rule applies to.
Example: xConfiguration Zones Policy SearchRules Rule 1 Target Type: Zone
Cisco VCS Administrator Guide (X8.1.1) Page 457 of 507