Cisco TelePresence Administrator's Manual page 192

Dial plan and call processing
Field Description
Status path The Status path identifies the path from where
the VCS can obtain the status of the remote
service.
The default is status.
Username The username used by the VCS to log in and
query the service.
Password The password used by the VCS to log in and
query the service.
Default CPL This is the fallback CPL used by the VCS if the
service is not available.
4. Click Create policy service.
Configuring a search rule to direct a search to the policy service
1. Go to Configuration > Dial plan > Search
2. Click New.
3. Configure the fields on the
the external policy server.
This example shows how to divert calls to aliases ending in .meet to the external policy server:
Rule name
Description
Priority
Protocol
Source
Request must be
authenticated
Mode
Pattern type
Pattern string
Pattern behavior
On successful match
Target
Cisco VCS Administrator Guide (X8.1.1)
rules.
Create search rule page as appropriate for the searches you want to direct to
A short name that describes the rule.
A free-form description of the rule.
As required, for example 10.
As required, for example Any.
As required, for example Any.
Configure this setting according to your authentication policy.
As required, for example Alias pattern match.
As required, for example Regex.
As required, for example.*\.meet@example.com
As required, for example Leave.
As required.
Note that if Stop is selected the VCS will not process any further search rules for
the original alias, but will restart the full call processing sequence if any new
aliases are returned in the CPL.
Select the policy service that was created in the previous step.
Configuring search rules to use an external service
Usage tips
The policy server must supply return status
information, see Policy server status and
resiliency [p.338].
The maximum plaintext length is 30
characters (which is subsequently
encrypted).
You can change it, for example, to redirect
to an answer service or recorded
message.
For more information, see Default CPL for
policy services [p.492].
Page 192 of 507