Cisco TelePresence Administrator's Manual page 475

Reference material
ExtAppStatusAdd
Allows another application running on the VCS to attach xstatus to the VCS XML xstatus tree.
Note: this command is intended for developer use only.
Name(r): <S:1, 64>
Descriptive name for the external application whose status is being referenced.
Filename(r): <S:0, 255>
XML file containing status that is to be attached for an external application.
Example: xCommand ExtAppStatusAdd Name: "foo" Filename: "foo.xml"
ExtAppStatusDelete
Deletes an external application status entry.
Note: this command is intended for developer use only.
Name(r): <S:1, 64>
Descriptive name for the external application whose status is being referenced.
Example: xCommand ExtAppStatusDelete Name: foo
Fail2ban
Configures automated intrusion protection categories.
Argument: <S:1, 64>
The value applied by the command.
Command: <unbanip/banip/reload/bantime/findtime/maxretry/addignoreip/delignoreip/status>
The action to take.
Jail: <S:1, 64>
The category to which the command is applied.
Example: xCommand Fail2ban Argument "192.0.12.0" Command: addignoreip Jail: sip-auth
FeedbackDeregister
Deactivates a particular feedback request.
ID: <1..3>
The index of the feedback request to be deactivated.
Example: xCommand FeedbackDeregister ID: 1
Cisco VCS Administrator Guide (X8.1.1)
Command reference — xCommand
Page 475 of 507