Using The Cisco Vcs; Web Interface; Installation And Initial Configuration; Using The Web Interface - Cisco TelePresence Administrator's Manual

Grey Headline (continued)

Using the Cisco VCS

Installation and initial configuration

Full installation and initial configuration instructions for the Cisco
VCS are contained in the VCS Getting Started Guide

Using the web interface

To use the web interface:
1. Open a browser window and in the address bar type either:
•
the IP address of the system
•
the FQDN of the system
2. Click Administrator Login.
3. Enter a valid administrator username and password and click
Login. (See the Login accounts section for details on setting
up administrator accounts.)
You are presented with the Overview page.
When logging in using the VCS web interface, you may
receive a warning message regarding the VCS's security
certificate. This can safely be ignored.
How page navigation is shown in this guide
In this Administrator Guide, instructions for navigating the web
interface are shown in the format:
•
Menu option1 > Menu option2
followed by the Name of the page that you will be taken to in
order to perform a task.

Supported browsers

The VCS web interface is designed for use with Internet
Explorer 6 or later, and Firefox 2 or later. It may work with Opera
and Safari, but you could encounter unexpected behavior.
Javascript and cookies must be enabled to use the VCS web
interface.
Overview and System
Introduction
status configuration
D14049.08
November 2010

Web interface

[28}.
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
15
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices