Cisco TelePresence Administrator's Manual page 362

Reference material
Event Description
External Server Communication with an external server failed unexpectedly. The Detail event
Communication parameter should differentiate between "no response" and "request rejected". Servers
Failure concerned are:
DNS
n
LDAP servers
n
Neighbor Gatekeeper
n
NTP servers
n
Peers
n
FindMe Search A search of the FindMe database has failed, for example due to no alias being provided. 1
Failed
Hardware There is an issue with the VCS hardware. If the problem persists, contact your Cisco
Failure support representative.
License Limit Licensing limits for a given feature have been reached. The Detail event parameter
Reached specifies the facility/limits concerned. Possible values for the detail field are:
Non Traversal Call Limit Reached
n
Traversal Call Limit Reached
n
If this occurs frequently, you may want to contact your Cisco representative to purchase
more licenses.
Message An incoming RAS message has been received.
Received
Message An incoming RAS NSM Keepalive, H.225, H.245 or a RAS message between peers has
Received been received.
Message (SIP) An incoming message has been received.
Received
Message This could be for one of two reasons:
If authentication is enabled and an endpoint has unsuccessfully attempted to send a
Rejected
n
message (such as a registration request) to the VCS. This could be either because
the endpoint has not supplied any authentication credentials, or because its
credentials do not match those expected by the VCS.
Clustering is enabled but bandwidth across the cluster has not been configured
n
identically, and the VCS has received a message relating to an unknown peer, link,
pipe, subzone or zone.
Message Sent An outgoing RAS message has been sent.
Message Sent An outgoing RAS NSM Keepalive, H.225, H.245 or a RAS message between peers has
been sent.
Message Sent (SIP) An outgoing message has been sent.
Operator Call An administrator has disconnected a call.
Disconnect
Outbound TLS The VCS is unable to communicate with another system over TLS. The event
Negotiation parameters provide more information.
Error
Package Install A package, for example a language pack, has been installed or removed.
Cisco VCS Administrator Guide (X8.1.1)
About Event Log levels
Level
1
1
1
2
3
4
1
2
3
4
1
1
2
Page 362 of 507