Cisco TelePresence Administrator's Manual page 439

Reference material
Command reference — xConfiguration
Policy AdministratorPolicy Service Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext length is 30 characters,
which will then be encrypted.
Example: xConfiguration Policy AdministratorPolicy Service Password: "password123"
Policy AdministratorPolicy Service Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy AdministratorPolicy Service Path: "service"
Policy AdministratorPolicy Service Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote service. Default: HTTPS.
Example: xConfiguration Policy AdministratorPolicy Service Protocol: HTTPS
Policy AdministratorPolicy Service Server [1..3] Address: <S: 0,128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote service.
Example: xConfiguration Policy AdministratorPolicy Service Server 1 Address:
"service.server.example.com"
Policy AdministratorPolicy Service Status Path: <S: 0..255>
Specifies the path for obtaining the remote service status. Default: status
Example: xConfiguration Policy AdministratorPolicy Service Status Path: status
Policy AdministratorPolicy Service TLS CRLCheck Mode: <On/Off>
Controls certificate revocation list checking of the certificate supplied by the policy service. When enabled, the server's X.509
certificate will be checked against the revocation list of the certificate authority of the certificate. Default: Off.
Example: xConfiguration Policy AdministratorPolicy Service TLS CRLCheck Mode: Off
Policy AdministratorPolicy Service TLS Verify Mode: <On/Off>
Controls X.509 certificate checking and mutual authentication between this VCS and the policy service. When enabled, the server's
FQDN or IP address, as specified in the address field, must be contained within the server's X.509 certificate (in either the Subject
Common Name or the Subject Alternative Name attributes). Default: On.
Example: xConfiguration Policy AdministratorPolicy Service TLS Verify Mode: On
Policy AdministratorPolicy Service UserName: <S: 0,30>
Specifies the user name used by the VCS to log in and query the remote policy service.
Example: xConfiguration Policy AdministratorPolicy Service UserName: "user123"
Policy FindMe CallerID: <FindMeID/IncomingID>
Determines how the source of an incoming call is presented to the callee. Default: IncomingID.
IncomingID: displays the address of the endpoint from which the call was placed.
FindMeID: displays the FindMe ID associated with the originating endpoint's address.
Example: xConfiguration Policy FindMe CallerId: FindMeID
Policy FindMe Mode: <Off/On/ThirdPartyManager>
Configures how the FindMe application operates. Default: Off.
Off: disables FindMe.
On: enables FindMe.
ThirdPartyManager: uses an off-box, third-party FindMe manager.
Example: xConfiguration Policy FindMe Mode: On
Cisco VCS Administrator Guide (X8.1.1) Page 439 of 507