Cisco TelePresence Administrator's Manual page 76

Unified Communications
Visual Voicemail
n
Jabber Update Server
n
Custom HTML tabs / icons
n
Directory Photo Host
n
The IP addresses of all discovered Unified CM nodes (that are running the CallManager or TFTP service) and
IM&P nodes are added automatically to the allow list and cannot be deleted . Note, however, that they are not
displayed on the HTTP server allow list
To configure the set of addresses to which HTTP access will be allowed:
1. On VCS Control, go to
2. Click HTTP server allow list.
3. Configure the hostnames or IP addresses of an HTTP server that a Jabber client located outside of the
enterprise is allowed to access.
Access is granted if the server portion of the client-supplied URI matches one of the names entered here,
or if it resolves via DNS lookup to a specified IP address.
Cisco VCS Administrator Guide (X8.1.1)
page.
Configuration > Unified Communications >
Configuring mobile and remote access on VCS
Configuration.
Page 76 of 507