Cisco TelePresence Administrator's Manual page 460

Reference material
Command reference — xConfiguration
Zones Zone [1..1000] DNS ZoneProfile: <Default/Custom/CiscoUnifiedCommunicationsManager/
CiscoUnifiedCommunicationsManagerBFCP/NortelCS1000/NonRegisteringDevice/LocalB2BUAService>
Determines how the zone's advanced settings are configured.
Default: uses the factory defaults.
Custom: allows you to configure each setting individually.
Preconfigured profiles: alternatively, choose one of the preconfigured profiles to automatically use the appropriate settings required
for connections to that type of system.
Example: xConfiguration Zones Zone 1 DNS ZoneProfile: Default
Zones Zone [1..1000] ENUM DNSSuffix: <S: 0, 128>
The DNS zone to append to the transformed E.164 number to create an ENUM host name which this zone is then queried for.
Example: xConfiguration Zones Zone 2 ENUM DNSSuffix: "e164.arpa"
Zones Zone [1..1000] H323 Mode: <On/Off>
Determines whether H.323 calls will be allowed to and from this zone. Default: On .
Example: xConfiguration Zones Zone 2 H323 Mode: On
Zones Zone [1..1000] HopCount: <1..255>
Specifies the hop count to be used when sending an alias search request to this zone. Note: if the search request was received from
another zone and already has a hop count assigned, the lower of the two values will be used. Default: 15 .
Example: xConfiguration Zones Zone 2 HopCount: 15
Zones Zone [1..1000] Name: <S: 1, 50>
Assigns a name to this zone.
Example: xConfiguration Zones Zone 3 Name: "UK Sales Office"
Zones Zone [1..1000] Neighbor Authentication Mode: <DoNotCheckCredentials/TreatAsAuthenticated/
CheckCredentials>
Controls how the VCS authenticates incoming messages from this zone and whether they are subsequently treated as
authenticated, unauthenticated, or are rejected. The behavior varies for H.323 messages, SIP messages that originate from a local
domain and SIP messages that originate from non-local domains. Default: DoNotCheckCredentials.
Example: xConfiguration Zones Zone 3 Neighbor Authentication Mode: DoNotCheckCredentials
Zones Zone [1..1000] Neighbor H323 CallSignaling Port: <1024..65534>
The port on the neighbor to use for H.323 calls to and from this VCS. Default: 1720 .
Example: xConfiguration Zones Zone 3 Neighbor H323 CallSignaling Port: 1720
Zones Zone [1..1000] Neighbor H323 Port: <1024..65534>
The port on the neighbor to use for H.323 searches to and from this VCS. Default: 1719 .
Example: xConfiguration Zones Zone 3 Neighbor H323 Port: 1719
Zones Zone [1..1000] Neighbor H323 SearchAutoResponse: <On/Off>
Determines what happens when the VCS receives a H323 search, destined for this zone. Default: Off.
Off: an LRQ message will be sent to the zone.
On: searches will be responded to automatically, without being forwarded to the zone.
Example: xConfiguration Zones Zone 3 Neighbor H323 SearchAutoResponse: Off
Zones Zone [1..1000] Neighbor Interworking SIP Audio DefaultCodec: <G711u/G711a/G722_48/G722_56/
G722_64/G722_1_16/G722_1_24/G722_1_32/G722_1_48/G723_1/G728/G729/AACLD_48/AACLD_56/AACLD_64/AMR>
Specifies which audio codec to use when empty INVITEs are not allowed. Default: G711u .
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Audio DefaultCodec: G711u
Cisco VCS Administrator Guide (X8.1.1) Page 460 of 507