Configuring Findme Groups - Cisco TelePresence Administrator's Manual

User accounts
Groups belonged to
Administrators and Region B
Administrators and Region C
Region A only

Configuring FindMe groups

The FindMe groups page
on the VCS, and lets you add, edit and delete groups.
Note that this page does not apply if the VCS is using
FindMe account data; in this case, FindMe accounts are maintained through Cisco TMS.
FindMe groups are only active when
n
FindMe groups determine which access rights members of the group have after they have been
n
successfully authenticated to use the VCS.
When a FindMe user logs in to the VCS their credentials are authenticated against the remote directory
service and they are assigned the access rights associated with the group to which that user belongs. If the
user account belongs to more than one group, the highest level permission is assigned.
The configurable options are:
Field Description
Name The name of the FindMe group.
It cannot contain any of the following
characters:
/ \ [ ] : ; | = , + * ? > < @ "
State Indicates if the group is enabled or
disabled.
Enabled: users can view and modify
their personal FindMe details,
devices and locations.
Disabled: users are not allowed to log
in to their account.
Default: Enabled
Cisco VCS Administrator Guide (X8.1.1)
Access permissions granted
read-write access to the API interface, but no web interface access
read-write access to the web and API interfaces
read-only access to the web interface and no API access
(Users > FindMe groups) lists all the FindMe groups that have been configured
remote FindMe authentication
Usage tips
The group names defined in the VCS must match the group
names that have been set up in the remote directory service to
manage FindMe accounts.
Configuring remote account authentication using LDAP
TMS Provisioning Extension services
is enabled.
to provide
Page 270 of 507