Cisco TelePresence Administrator's Manual page 198

Dial plan and call processing
Field Description
Default CPL This is the fallback CPL used by the VCS if the
service is not available.
4. Click Save.
The VCS should connect to the policy service server and start using the service for Call Policy decisions.
Any connection problems will be reported on this page. Check the
and check for additional information messages against the Server address fields.
Cisco VCS Administrator Guide (X8.1.1)
Usage tips
You can change it, for example, to redirect
to an answer service or recorded
message.
For more information, see Default CPL for
policy services [p.492].
Status area at the bottom of the page
About Call Policy
Page 198 of 507