Cisco TelePresence Administrator's Manual page 424

Reference material
Command reference — xConfiguration
Applications ConferenceFactory Template: <S:0,60>
The alias that the VCS will tell the endpoint to dial in order to create a Multiway conference on the MCU. This alias must route to the
MCU as a fully-qualified SIP alias
Example: Applications ConferenceFactory Template: "563%%@example.com"
Applications External Status [1..10] Filename: <S:0,255>
XML file containing status that is to be attached for an external application.
Example: xConfiguration Applications External Status 1 Filename: "foo.xml"
Applications External Status [1..10] Name: <S:0,64>
Descriptive name for the external application whose status is being referenced.
Example: xConfiguration Applications External Status 1 Name: "foo"
Applications Presence Server Mode: <On/Off>
Enables and disables the SIMPLE Presence Server. SIP must also be enabled for the Presence Server to function. Default: Off.
Example: xConfiguration Applications Presence Server Mode: On
Applications Presence Server Publication ExpireDelta: <30..7200>
Specifies the maximum time (in seconds) within which a publisher must refresh its publication.
Default: 1800
Example: xConfiguration Applications Presence Server Publication ExpireDelta: 1800
Applications Presence Server Subscription ExpireDelta: <30..7200>
Specifies the maximum time (in seconds) within which a subscriber must refresh its subscription. Default: 3600.
Example: xConfiguration Applications Presence Server Subscription ExpireDelta: 3600
Applications Presence User Agent ExpireDelta: <1..65534>
Specifies the lifetime value (in seconds) the Presence User Agent will advertise in the PUBLISH messages it sends to the Presence
Server. The Presence User Agent will refresh its PUBLISH messages at 75% of this value (to keep them active). The Presence
Server may reduce this value in its responses.
Default: 3600
Example: xConfiguration Applications Presence User Agent ExpireDelta: 3600
Applications Presence User Agent Mode: <On/Off>
Enables and disables the SIMPLE Presence User Agent (PUA). The PUA provides presence information on behalf of registered
endpoints. SIP mode must also be enabled for the PUA to function. Default: Off.
Example: xConfiguration Applications Presence User Agent Mode: Off
Applications Presence User Agent Presentity Idle Status: <Offline/Online>
Default presentity status published by the Presence User Agent. Default: Online.
Online: publish registered endpoints as online.
Offline: publish registered endpoints as offline.
Example: xConfiguration Applications Presence User Agent Presentity Idle Status: Online
Applications Presence User Agent RetryDelta: <1..65534>
Specifies the time (in seconds) after which the Presence User Agent will attempt to resend a PUBLISH to the Presence Server. This
will occur if the original attempt failed due to resource issues or other transitory errors. Default: 1800.
Example: xConfiguration Applications Presence User Agent RetryDelta: 1800
Authentication ADS ADDomain: <S: 0,255>
The Kerberos realm used when the VCS joins the AD domain. Note: this field is case sensitive.
Example: xConfiguration Authentication ADS ADDomain: "CORPORATION.INT"
Cisco VCS Administrator Guide (X8.1.1) Page 424 of 507