Cisco TelePresence Administrator's Manual page 34

Grey Headline (continued)
Status
Events and levels
Event
Admin Session Finish
Admin Session Login Failure
Admin Session Start
Application Exit
Application Failed
Application Start
Application Warning
Authorization Failure
Beginning System Backup
Beginning System Restore
Call Answer Attempted
Call Attempted
Call Bandwidth Changed
Call Connected
Call Diverted
Call Disconnected
Call Inactivity Timer
Call Rejected
Call Rerouted
Completed System Backup
Completed System restore
Configlog Cleared
Decode Error
Directory Service Database
Started
Overview and System
Introduction
status configuration
D14049.08
November 2010
Description
An administrator has logged off the system.
An unsuccessful attempt has been made to log in as an administrator. This could be because an incorrect username or password (or both) was
entered.
An administrator has logged onto the system.
The VCS application has been exited. Further information may be provided in the Detail event parameter.
The VCS application is out of service due to an unexpected failure.
The VCS has started. Further detail may be provided in the Detail event parameter.
The VCS application is still running but has experienced a recoverable problem. Further detail may be provided in the Detail event parameter.
The user has either entered invalid credentials, does not belong to an access group, or belongs to a group that has an access level of "None". Applies
when remote authentication is enabled.
A system backup has started.
A system restore has started.
An attempt to answer a call has been made.
A call has been attempted.
The endpoints in a call have renegotiated call bandwidth.
A call has been connected.
A call has been diverted.
A call has been disconnected.
A call has been disconnected due to inactivity.
A call has been rejected. The Reason event parameter contains a textual representation of the H.225 additional cause code.
The VCS has Call Routed mode set to Optimal and has removed itself from the call signaling path.
A system backup has completed.
A system restore has completed.
An operator cleared the Configuration Log.
A syntax error was encountered when decoding a SIP or H.323 message.
The TMS Agent database has started.
Cisco VCS Zones and
configuration neighbors
Event Log
Clustering and Call Bandwidth
peers processing control
34
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Level
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Appendices