Cisco TelePresence Administrator's Manual page 218

Grey Headline (continued)
Command reference - xConfiguration
Policy AdministratorPolicy Mode: <On/Off>
Enables and disables use of Call Policy.
Default: Off
Example: xConfiguration Policy AdministratorPolicy Mode: Off
Policy FindMe CallerID: <FindMeID/IncomingID>
Determines how the source of an incoming call is presented to the callee.
IncomingID: displays the address of the endpoint from which the call was placed.
FindMeID: displays the FindMe ID associated with the originating endpoint's address.
Default: IncomingID
Example: xConfiguration Policy FindMe CallerId: FindMeID
Policy FindMe Mode: <Off/On/ThirdPartyManager>
Configures how the FindMe application operates.
Off: disables FindMe.
On: enables FindMe.
ThirdPartyManager: uses an off-box, third-party FindMe manager.
Default: Off
Example: xConfiguration Policy FindMe Mode: On
Policy FindMe Server Address: <S: 0, 128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server Address: "userpolicy.server.example.com"
Policy FindMe Server Password: <S: 0, 82>
Specifies the password used by the VCS to log in and query the remote FindMe Manager. The maximum plaintext length is 30 characters, which will then be encrypted.
Example: xConfiguration Policy FindMe Server Password: "password123"
Policy FindMe Server Path: <S: 0, 255>
Specifies the URL of the remote FindMe Manager.
Default: service
Example: xConfiguration Policy FindMe Server Path: "service"
Policy FindMe Server Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote FindMe Manager.
Default: HTTP
Example: xConfiguration Policy FindMe Server Protocol: HTTP
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
218
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices