Cisco TelePresence Administrator's Manual page 283

Grey Headline (continued)
Command reference - xStatus
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from neighbor/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalServer: {Visible if Type is TraversalServer}
SIP:
Port: <Active/Inactive>
H323:
Port: <Active/Inactive>
Peer [1..6]:
H323: {Visible if H323 Mode=On for Zone}
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Calls: {0..900 entries}
Call [0..900]:
CallID: <S: 1,255>
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
283
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices