Cisco TelePresence Administrator's Manual page 210

Grey Headline (continued)
Command reference - xConfiguration
ExternalManager Path: <S: 0, 255>
Sets the URL of the external manager.
Default: tms/public/external/management/SystemManagementService.asmx
Example: xConfiguration ExternalManager Path: "tms/public/external/management/SystemManagementService.asmx"
ExternalManager Protocol: <HTTP/HTTPS>
The protocol used to connect to the external manager.
Default: HTTP
Example: xConfiguration ExternalManager Protocol: HTTP
ExternalManager Server Certificate Verification Mode: <On/Off>
Controls whether the certificate presented by the external manager is verified.
Default: On
Example: xConfiguration ExternalManager Server Certificate Verification Mode: On
H323 Gatekeeper AutoDiscovery Mode: <On/Off>
Determines whether or not the VCS responds to gatekeeper discovery requests from endpoints.
Default: On
Example: xConfiguration H323 Gatekeeper AutoDiscovery Mode: On
H323 Gatekeeper CallSignaling PortRange End: <1024..65534>
Specifies the upper port in the range to be used by calls once they are established.
Default: 19999
Example: xConfiguration H323 Gatekeeper CallSignaling PortRange End: 19999
H323 Gatekeeper CallSignaling PortRange Start: <1024..65534>
Specifies the lower port in the range to be used by calls once they are established.
Default: 15000
Example: xConfiguration H323 Gatekeeper CallSignaling PortRange Start: 15000
H323 Gatekeeper CallSignaling TCP Port: <1024..65534>
Specifies the port that listens for H.323 call signaling.
Default: 1720
Example: xConfiguration H323 Gatekeeper CallSignaling TCP Port: 1720
H323 Gatekeeper CallTimeToLive: <60..65534>
Specifies the interval (in seconds) at which the VCS polls the endpoints in a call to verify that they are still in the call.
Default: 120
Example: xConfiguration H323 Gatekeeper CallTimeToLive: 120
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
210
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices