Cisco TelePresence Administrator's Manual page 258

Grey Headline (continued)
Command reference - xCommand
RouteAdd
Adds and configures a new IP route (also known as a static route).
Address(r): <S: 1, 39>
Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies.
Default: 32
PrefixLength(r): <1..128>
Specifies the number of bits of the IP address which must match when determining the network to which this route applies.
Gateway(r): <S: 1, 39>
Specifies the IP address of the gateway for this route.
Interface: <Auto/LAN1/LAN2>
Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use.
Default: Auto
Example: xCommand RouteAdd Address: "10.13.8.0" PrefixLength: 32 Gateway: "192.44.0.1"
RouteDelete
Deletes a route.
RouteId(r): <1..50>
The index of the route to be deleted.
Example: xCommand RouteDelete RouteId: 1
SearchRuleAdd
Adds a new search rule to route searches and calls toward a zone.
Name(r): <S: 0..50>
Descriptive name for the search rule.
ZoneName: <S: 0..50>
The zone to query if the alias matches the search rule.
Description: <S: 0..64>
A free-form description of the search rule.
Example: xCommand SearchRuleAdd Name: "DNS lookup" ZoneName: "Sales Office" Description: "Send query to the DNS zone"
SearchRuleDelete
Deletes a search rule.
SearchRuleId(r): <1..2000>
The index of the search rule to be deleted.
Example: xCommand SearchRuleDelete SearchRuleId: 1
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
258
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices