Cisco TelePresence Administrator's Manual page 255

Grey Headline (continued)
Command reference - xCommand
ForceConfigUpdate
Performs an xCommand DefaultValuesSet Level: 2 on the specified peer, and then forces the relevant configuration on the peer to be updated to match that of the cluster master.
PeerId: <1..6>
The index of the cluster peer to be updated.
Example: xCommand ForceConfigUpdate PeerId: 1
LinkAdd
Adds and configures a new link.
LinkName(r): <S: 1, 50>
Assigns a name to this link.
Node1: <S: 1, 50>
Specifies the first zone or subzone to which this link will be applied.
Node2: <S: 1, 50>
Specifies the second zone or subzone to which this link will be applied.
Pipe1: <S: 1, 50>
Specifies the first pipe to be associated with this link.
Pipe2: <S: 1, 50>
Specifies the second pipe to be associated with this link.
Example: xCommand LinkAdd LinkName: "Subzone1 to UK" Node1: "Subzone1" Node2: "UK Sales Office" Pipe1: "512Kb ASDL"
LinkDelete
Deletes a link.
LinkId(r): <1..3000>
The index of the link to be deleted.
Example: xCommand LinkDelete LinkId: 2
ListPresentities
Returns a list of all the presentities being watched by a particular subscriber.
Subscriber(r): <S:1..255>
The URI of the subscriber who is watching.
Example: xCommand ListPresentities Subscriber: "john.smith@example.com"
ListSubscribers
Returns a list of all subscribers who are watching for the presence information of a particular presentity.
Presentity(r): <S:1..255>
The URI of the presentity being watched.
Example: xCommand ListSubscribers Presentity: "mary.jones@example.com"
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
255
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices