Cisco TelePresence Administrator's Manual page 240

Grey Headline (continued)
Command reference - xConfiguration
Zones Zone [1..1000] Neighbor Interworking SIP Video DefaultResolution: <None/QCIF/CIF/4CIF/SIF/4SIF/VGA/SVGA/XGA>
Specifies which video resolution to use when empty INVITEs are not allowed.
Default: CIF
Example: xConfiguration Zones Zone 3 Neighbor Interworking SIP Video DefaultResolution: CIF
Zones Zone [1..1000] Neighbor Peer [1..6] Address: <S:0..128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the neighbor. If the neighbor zone is a VCS cluster, this will be one of the peers in that cluster.
Example: xConfiguration Zones Zone 3 Neighbor Peer 1 Address: "192.44.0.18"
Zones Zone [1..1000] Neighbor Registrations: <Allow/Deny>
Controls whether proxied SIP registrations routed through this zone are accepted.
Default: Allow
Example: xConfiguration Zones Zone 3 Neighbor Registrations: Allow
Zones Zone [1..1000] Neighbor SIP Authentication Trust Mode: <On/Off>
Controls whether authenticated SIP messages (ones containing a P-Asserted-Identity header) from this zone are trusted.
On: messages are trusted without further challenge.
Off: messages are challenged for authentication.
Default: Off
Example: xConfiguration Zones Zone 3 Neighbor SIP Authentication Trust Mode: On
Zones Zone [1..1000] Neighbor SIP Duo Video Filter Mode: <On/Off>
Determines whether INVITE requests sent to this zone filter out Duo Video. This option may be required to enable interoperability with SIP devices that do not support Duo Video.
On: the second video line in any outgoing INVITE request is removed.
Off: INVITE requests are not modified.
Default: Off
Example: xConfiguration Zones Zone 1 Neighbor SIP Duo Video Filter Mode: Off
Zones Zone [1..1000] Neighbor SIP Encryption Mode: <Auto/Off>
Determines whether or not the VCS will allow encrypted SIP calls on this zone.
Auto: SIP calls will be encrypted if a secure SIP transport (TLS) is used.
Off: SIP calls will never be encrypted.
Default: Auto
Example: xConfiguration Zones Zone 3 Neighbor SIP Encryption Mode: Auto
Zones Zone [1..1000] Neighbor SIP MIME Strip Mode: <On/Off>
Controls whether multipart MIME stripping is performed on requests from this zone. This must be set to On for connections to a Microsoft Office Communications Server 2007.
Default: Off
Example: xConfiguration Zones Zone 3 Neighbor SIP MIME Strip Mode: Off
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
240
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices