Cisco TelePresence Administrator's Manual page 205

Grey Headline (continued)
Command reference - xConfiguration
Applications Presence User Agent ExpireDelta: <1..65534>
Specifies the lifetime value (in seconds) the Presence User Agent will advertise in the PUBLISH messages it sends to the Presence Server. The Presence User Agent will refresh its PUBLISH
messages at 75% of this value (to keep them active). The Presence Server may reduce this value in its responses.
Default: 3600
Example: xConfiguration Applications Presence User Agent ExpireDelta: 3600
Applications Presence User Agent Mode: <On/Off>
Enables and disables the SIMPLE Presence User Agent (PUA). The PUA provides presence information on behalf of registered endpoints. SIP mode must also be enabled for the PUA to
function.
Default: Off
Example: xConfiguration Applications Presence User Agent Mode: Off
Applications Presence User Agent RetryDelta: <1..65534>
Specifies the time (in seconds) after which the Presence User Agent will attempt to resend a PUBLISH to the Presence Server. This will occur if the original attempt failed due to resource
issues or other transitory errors.
Default: 5
Example: xConfiguration Applications Presence User Agent RetryDelta: 5
Authentication Credential [1..2500] Name: <S: 0, 128>
Defines the name for this entry in the local authentication database.
Example: xConfiguration Authentication Credential 1 Name: "john smith"
Authentication Credential [1..2500] Password: <S: 0, 215>
Defines the password for this entry in the local authentication database. The maximum plaintext length is 128 characters, which will then be encrypted.
Example: xConfiguration Authentication Credential 1 Password: "password123"
Authentication Database: <LocalDatabase/LDAPDatabase>
Selects between a local authentication database and a remote LDAP repository for the storage of password information for authentication.
Default: LocalDatabase
Example: xConfiguration Authentication Database: LocalDatabase
Authentication LDAP AliasOrigin: <LDAP/Endpoint/Combined>
Determines which aliases (i.e. from the LDAP repository or the endpoint) should be used to register the endpoint.
Combined: the endpoint will be registered both with the aliases which it has presented and with those configured in the LDAP repository.
Default: LDAP
Example: xConfiguration Authentication LDAP AliasOrigin: LDAP
Authentication LDAP BaseDN: <S: 0, 255>
Specifies the Distinguished Name to use when connecting to an LDAP server.
Example: xConfiguration Authentication LDAP BaseDN: "dc=example,dc=company,dc=com"
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
205
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices