Cisco TelePresence Administrator's Manual page 227

Grey Headline (continued)
Command reference - xConfiguration
Transform [1..100] Pattern String: <S: 0, 60>
The pattern against which the alias is compared.
Example: xConfiguration Transform 1 Pattern String: "example.net"
Transform [1..100] Pattern Type: <Exact/Prefix/Suffix/Regex>
How the pattern string must match the alias for the transform to be applied.
Exact: the entire string must exactly match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string is treated as a regular expression.
Default: Prefix
Example: xConfiguration Transform 1 Pattern Type: Suffix
Transform [1..100] Priority: <1..65534>
Assigns a priority to the specified transform. Transforms are compared with incoming aliases in order of priority, and the priority must be unique for each transform.
Default: 1
Example: xConfiguration Transform 1 Priority: 10
Transform [1..100] State: <Enabled/Disabled>
Indicates if the transform is enabled or disabled. Disabled transforms are ignored.
Example: xConfiguration Transform 1 State: Enabled
Traversal Media Port End: <1025..65533>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), specifies the upper port in the range to be used for the media. Ports are allocated from this range in pairs,
the first of each being even. Therefore the range must end with an odd number.
Default: 52399
Example: xConfiguration Traversal Media Port End: 52399
Traversal Media Port Start: <1024..65532>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), specifies the lower port in the range to be used for the media. Ports are allocated from this range in pairs,
the first of each being even. Therefore the range must start with an even number.
Default: 50000
Example: xConfiguration Traversal Media Port Start: 50000
Traversal Server H323 Assent CallSignaling Port: <1024..65534>
Specifies the port on the VCS to be used for Assent signaling.
Default: 2776
Example: xConfiguration Traversal Server H323 Assent CallSignaling Port: 2777
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
227
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices