Cisco TelePresence Administrator's Manual page 235

Grey Headline (continued)
Command reference - xConfiguration
Zones Policy SearchRules Rule [1..2000] Pattern String: <S: 0..60>
The pattern against which the alias is compared. (Applies to Alias Pattern Match mode only.)
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern String: "@example.com"
Zones Policy SearchRules Rule [1..2000] Pattern Type: <Exact/Prefix/Suffix/Regex>
How the pattern string must match the alias for the rule to be applied. (Applies to Alias Pattern Match mode only.)
Exact: the entire string must exactly match the alias character for character.
Prefix: the string must appear at the beginning of the alias.
Suffix: the string must appear at the end of the alias.
Regex: the string is treated as a regular expression.
Default: Prefix
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Type: Suffix
Zones Policy SearchRules Rule [1..2000] Priority: <1..65534>
The order in the search process that this rule is applied, when compared to the priority of the other search rules. All Priority 1 search rules are applied first, followed by all Priority 2 search
rules, and so on.
Default: 100
Example: xConfiguration Zones Policy SearchRules Rule 1 Priority: 100
Zones Policy SearchRules Rule [1..2000] Progress: <Continue/Stop>
Specifies the ongoing search behavior if the alias matches this search rule. If 'stop' is selected, any rules with the same priority level as this rule are still applied.
Continue: continue applying the remaining search rules (in priority order) until the endpoint identified by the alias is found.
Stop: do not apply any more search rules, even if the endpoint identified by the alias is not found in the target zone.
Default: Continue
Example: xConfiguration Zones Policy SearchRules Rule 1 Progress: Continue
Zones Policy SearchRules Rule [1..2000] Source: <Any/AllZones/LocalZone>
The sources of the requests for which this rule applies.
Any: locally registered devices, neighbor or traversal zones, and any non-registered devices.
AllZones: locally registered devices plus neighbor or traversal zones.
LocalZone: locally registered devices only.
Default: Any
Example: xConfiguration Zones Policy SearchRules Rule 1 Source: Any
Zones Policy SearchRules Rule [1..2000] State: <Enabled/Disabled>
Indicates if the search rule is enabled or disabled. Disabled search rules are ignored.
Default: Enabled
Example: xConfiguration Zones Policy SearchRules Rule 1 State: Enabled
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
235
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices