Cisco TelePresence Administrator's Manual page 246

Grey Headline (continued)
Command reference - xConfiguration
Zones Zone [1..1000] TraversalServer SIP Transport: <TCP/TLS>
Determines which of the two transport types will be used for SIP calls between the traversal client and VCS.
Default: TLS
Example: xConfiguration Zones Zone 5 TraversalServer SIP Transport: TLS
Zones Zone [1..1000] TraversalServer TCPProbe KeepAliveInterval: <1..65534>
Sets the interval (in seconds) with which the traversal client will send a TCP probe to the VCS once a call is established, in order to keep the firewall's NAT bindings open.
Default: 20
Example: xConfiguration Zones Zone 5 TraversalServer TCPProbe KeepAliveInterval: 20
Zones Zone [1..1000] TraversalServer TCPProbe RetryCount: <1..65534>
Sets the number of times the traversal client will attempt to send a TCP probe to the VCS.
Default: 5
Example: xConfiguration Zones Zone 5 TraversalServer TCPProbe RetryCount: 5
Zones Zone [1..1000] TraversalServer TCPProbe RetryInterval: <1..65534>
Sets the frequency (in seconds ) with which the traversal client will send a TCP probe to the VCS.
Default: 2
Example: xConfiguration Zones Zone 5 TraversalServer TCPProbe RetryInterval: 2
Zones Zone [1..1000] TraversalServer UDPProbe KeepAliveInterval: <1..65534>
Sets the interval (in seconds) with which the traversal client will send a UDP probe to the VCS once a call is established, in order to keep the firewall's NAT bindings open.
Default: 20
Example: xConfiguration Zones Zone 5 TraversalServer UDPProbe KeepAliveInterval: 20
Zones Zone [1..1000] TraversalServer UDPProbe RetryCount: <1..65534>
Sets the number of times the traversal client will attempt to send a UDP probe to the VCS.
Default: 5
Example: xConfiguration Zones Zone 5 TraversalServer UDPProbe RetryCount: 5
Zones Zone [1..1000] TraversalServer UDPProbe RetryInterval: <1..65534>
Sets the frequency (in seconds) with which the traversal client will send a UDP probe to the VCS.
Default: 2
Example: xConfiguration Zones Zone 5 TraversalServer UDPProbe RetryInterval: 2
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
246
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices