Cisco TelePresence Administrator's Manual page 256

Grey Headline (continued)
Command reference - xCommand
Locate
Runs the VCS's location algorithm to locate the endpoint identified by the given alias, searching locally, on neighbors, and on systems discovered through the DNS system, within the
specified number of 'hops'. Results are reported back through the xFeedback mechanism, which must therefore be activated before issuing this command (e.g. xFeedback register
event/locate).
Alias(r): <S: 1, 60>
The alias associated with the endpoint you wish to locate.
HopCount(r): <0..255>
The hop count to be used in the search.
Protocol(r): <H323/SIP>
The protocol used to initiate the search.
SourceZone: <S: 1..50>
The zone from which to simulate the search request. Choose from the Default Zone (an unknown remote system), the Local Zone (a locally registered endpoint) or any other
configured neighbor, traversal client or traversal server zone.
Example: xCommand Locate Alias: "john.smith@example.com" HopCount: 15 Protocol: SIP SourceZone: LocalZone
Log
Sets logging levels on specific modules.
Note: this command is intended for developer use only.
Module: <S:0..255>
The name of the module.
TraceLevel: <Default/Error/Warn/Info/Debug/Trace>
The level of tracing to use on the specified module. Default returns the trace level to its default value.
Example: xCommand Log Module: "foo" TraceLevel: Error
LogPersist
Saves the current log levels so that they will persist over a restart.
This command has no parameters.
Example: xCommand LogPersist
OptionKeyAdd
Adds a new option key to the VCS. These are added to the VCS in order to add extra functionality, such as increasing the VCS's capacity. Contact your Cisco representative for further
information.
Key(r): <S: 0, 90>
Specifies the option key of your software option.
Example: xCommand OptionKeyAdd Key: "1X4757T5-1-60BAD5CD"
Overview and System
Introduction
status configuration
D14049.08
November 2010
Cisco VCS Zones and Clustering and
configuration neighbors peers
Call Bandwidth
processing control
256
CISCO TELEPRESENCE VIDEO COMMUNICATION SERVER
Firewall
Applications Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices