Cisco TelePresence Administrator's Manual page 236

Telepresence video communication server
Hide thumbs Also See for TelePresence:
Table of Contents

Advertisement

Grey Headline (continued)
Command reference - xConfiguration
Zones Policy SearchRules Rule [1..2000] Target ZoneName: <S: 0..50>
The zone to query if the alias matches the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Target ZoneName: "Sales Office"
Zones Zone [1..1000] DNS IncludeAddressRecord: <On/Off>
Determines whether, if no NAPTR (SIP) or SRV (SIP and H.323) records have been found for the dialed alias via this zone, the VCS will then query for A and AAAA DNS Records.
Default: Off
Example: xConfiguration Zones Zone 1 DNS IncludeAddressRecord: Off
Zones Zone [1..1000] DNS Interworking SIP Audio DefaultCodec: <G711u/G711a/G722_48/G722_56/G722_64/G722_1_16/G722_1_24/G722_1_32/G722_1_48/G723_1/G728/G729/AALCD_48/
AALCD_56/AALCD_64/AMR>
Specifies which audio codec to use when empty INVITEs are not allowed.
Default: G711u
Example: xConfiguration Zones Zone 1 DNS Interworking SIP Audio DefaultCodec: G711u
Zones Zone [1..1000] DNS Interworking SIP EmptyInviteAllowed: <On/Off>
Determines whether the VCS will generate a SIP INVITE message with no SDP to send to this zone. INVITEs with no SDP mean that the destination device is asked to initiate the codec
selection, and are used when the call has been interworked locally from H.323.
On: SIP INVITEs with no SDP will be generated and sent to this neighbor.
Off: SIP INVITEs will be generated and a pre-configured SDP will be inserted before the INVITEs are sent to this neighbor.
Default: On
Example: xConfiguration Zones Zone 1 DNS Interworking SIP EmptyInviteAllowed: On
Zones Zone [1..1000] DNS Interworking SIP Video DefaultBitrate: <64..2048>
Specifies which video bitrate to use when empty INVITEs are not allowed.
Default: 384
Example: xConfiguration Zones Zone 1 DNS Interworking SIP Video DefaultBitrate: 384
Zones Zone [1..1000] DNS Interworking SIP Video DefaultCodec: <None/H261/H263/H263p/H263pp/H264>
Specifies which video codec to use when empty INVITEs are not allowed.
Default: H263
Example: xConfiguration Zones Zone 1 DNS Interworking SIP Video DefaultCodec: H263
Zones Zone [1..1000] DNS Interworking SIP Video DefaultResolution: <None/QCIF/CIF/4CIF/SIF/4SIF/VGA/SVGA/XGA>
Specifies which video resolution to use when empty INVITEs are not allowed.
Default: CIF
Example: xConfiguration Zones Zone 1 DNS Interworking SIP Video DefaultResolution: CIF
Overview and
System
Introduction
status
configuration
D14049.08
November 2010
Cisco VCS
Zones and
Clustering and
configuration
neighbors
peers
Call
Bandwidth
processing
control
236
CISCO TELEPRESENCE
VIDEO COMMUNICATION SERVER
Firewall
Applications
Maintenance
traversal
ADMINISTRATOR GUIDE
Appendices

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence x5.1

Table of Contents