Configuring Network Settings; Configuring Network General Settings; Figure 5-1 Network Type - Honeywell 30 Series Configuration Manual

Hide thumbs Also See for 30 Series:
Table of Contents

Advertisement

5 Configuring Network Settings

This chapter contains the following sections:
Configuring Network General Settings, page 43
Configuring Streaming Protocols, page 46
Configuring DDNS Settings, page 49
Configuring QoS Settings, page 50
Configuring SNMP Settings, page 51
Configuring HTTPS Settings, page 52
Configuring IEEE 802.1X Settings, page 54

Configuring Network General Settings

This section describes how to configure a wired network connection for the camera.

Figure 5-1 Network Type

LAN
Get IP address automatically: Select this option to obtain an available dynamic IP address
assigned by the DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the camera.
Configuring Network Settings
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents