Troubleshooting Using Diagnostic Options - Honeywell ACUIX User Manual

Troubleshooting

Troubleshooting Using Diagnostic Options

94
You can troubleshoot problems using the dome's on-screen display menus.
Displaying Voltages
You can view the actual voltages measured at the dome versus the supply
voltages. The 15 V supply is used to operate the camera. The 3.3 V supply is
used to operate the printed circuit boards in the scan assembly and housing.
To display voltages:
• Select 7 Enhanced Features
Displaying the Total Run Time Counter
You can view the total run time for pan, tilt, zoom, auto iris, manual iris, auto
focus, manual focus, and PreShot focus.
To display the total run time counter:
• Select 4 Diagnostic Options
Clearing the Memory
You can delete all of the alarms, presets, preset tours, and sectors stored in the
dome's memory.
Clearing the memory does not affect the OSD language or privacy zones.
To clear the memory:
1. Select 4 Diagnostic Options
2. Select Y (yes) to continue, or select N (no) to cancel.
If Y is selected, the following message appears:
EXTREME CAUTION: This will delete all of the Alarms, Presets,
Preset Tours and Sectors that are stored in memory. Are you
sure you want to do this? Y/N
Select Y (yes) to continue, or select N (no) to cancel.

6 Display Supply Voltages.

2 Total Run Time (PTZ, Ir&Fo).

3 Clear the Memory.