Setting High Sensitivity Mode; Setting Field Noise Reduction; Setting White Balance - Honeywell ACUIX User Manual

Configuring HDXG Camera Settings

Setting High Sensitivity Mode

Setting Field Noise Reduction

Setting White Balance

46
High sensitivity mode provides higher sensitivity at the expense of less clearly
defined lines and countours of objects in motion. Enabling high sensitivity mode
selects interlaced scanning, while disabling high sensitivity mode selects
progressive scanning.
To enable/disable high sensitivity mode:
• Select 5 Camera Options
ON or OFF (default).
Field noise reduction (FNR) technology minimizes random noise and
after-images generated by moving subjects, producing clear, sharp images and
improving motion detection performance. Field noise reduction can also reduce
the bandwith and storage volume required if the video is digitized and
compressed. Auto and manual field noise reduction modes are available.
To set the field noise reduction mode:
• Select 5 Camera Options

1 FNR Mode Auto (default) or Manual.
• If Auto is selected, you can adjust the level of noise reduction by
selecting 5 Camera Options

Reduction 2 Auto FNR
Strong.
• If Manual is selected, you can adjust the level of noise reduction by
selecting 5 Camera Options

Reduction Manual FNR (O–16), and then selecting a value between
0 (weak) and 16 (strong).
If manual white balance is enabled, the red and blue gain settings can be
changed. If manual white balance is disabled, the red and blue gain settings can
be changed but the settings do not take affect until the manual white balance is
enabled again.
 
3 Video Setup 8 High Sensitivity Mode
 
3 Video Setup 9 Field Noise Reduction

3 Video Setup

Slight (default), Weak, Medium, or

3 Video Setup



9 Field Noise

9 Field Noise