Setting E-Flip And Mirror Image; Setting The Vertical Phase Edge - Honeywell ACUIX User Manual

Setting E-Flip and Mirror Image

Setting the Vertical Phase Edge

Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
To enable/disable manual white balance:
• Select 5 Camera Options
ON or OFF (default).
To set red gain and blue gain:
1. Enable manual white balance.
2. Select 5 Camera Options
3 Blue Gain 0–511.
3. Select a value between 0 and 511 (default = 128).
E-Flip turns the image upside down. Mirror Image reverses the image
horizontally.
To enable/disable E-Flip:
• Select 5 Camera Options
(default).
To enable/disable Mirror Image:
• Select 5 Camera Options
OFF (default)
Vertical Phase Edge, or line lock, lets you synchronize all analog cameras
connected to the same power line. This prevents the picture on the monitor from
rolling vertically when switching from one camera to another.
Line lock can also help an analog VCR to remain in sync when switching
between properly adjusted, line-locked cameras. Line lock is generally of no
benefit with digital (LCD or flat screen) monitors and DVRs.
Note You need an AC power supply to use this feature.
 
4 White Balance 1 Manual White Balance
 
4 White Balance
 
5 Video Options
 
5 Video Options

2 Red Gain 0–511 or

2 E-Flip ON or OFF

3 Mirror Image ON or
47