Table 2-4 Baud Rate And Parity Settings By Protocol; Table 2-5 Sw6 Baud Rate And Parity Settings - Honeywell ACUIX User Manual

Setting the Baud Rate and Parity (SW6)
Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
The baud rate and parity settings are determined by the protocol that you have
selected. Table 2-4 lists the baud rate and parity settings that correspond to each
protocol.
Table 2-4 Baud Rate and Parity Settings by Protocol
Protocol
IntelliBus™
MAXPRO-mode (default)
VCL - RS485
VCL UTC
Diamond
Pelco P
Pelco D
Pelco P_AD
Pelco D_AD
The baud rate and parity are set using DIP switch SW6 (see
factory default is 9600 baud, even parity.
Table 2-5 SW6 Baud Rate and Parity Settings
Values Baud Rate Switch Position
1 2
600 OFF OFF
1200 ON OFF
2400 OFF ON
4800 ON ON
9600 OFF OFF
19200 ON OFF
38400 OFF ON
57600 ON ON
115200 OFF OFF
None
Even
Odd
* The default position for pins 7 and 8 is OFF (see
Baud Rate and Parity
38400 baud, no parity
9600 baud, even parity
9600 baud, no parity
9600 baud, no parity
9600 baud, even parity
4800 baud, no parity
2400 baud, no parity
4800 baud, no parity
2400 baud, no parity
Parity Switch
Position
3 4 5
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON OFF
ON OFF
ON OFF
ON OFF
OFF ON
OFF
ON
OFF
Table 2-1).
Table 2-5). The
Other*
6 7 8
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
7