CHAPTER
10
TROUBLESHOOTING
Troubleshooting for Dynamic Intra Frame Period
Before connecting the camera to NVR(s) and VMS(es) with Smart codec unsupported,
log on to the camera's web page, go to Setup Camera Setup Video STREAM
Video settings for main stream/Video settings for sub stream/Video settings for
third stream and uncheck Dynamic I-Frame period as shown in the following
illustration.
Figure 101 Video Settings for Dynamic I-Frame Period
Otherwise, the following problems may be observed on NVR(s) and VMS(es), when an
operator is doing actions, e.g. play live videos, play back videos and export clips.
88
Honeywell 30 Series IP Cameras User Guide