Displaying The Dome Address; Displaying Sectors And Presets - Honeywell ACUIX User Manual

Configuring the OSD

Displaying the Dome Address

Displaying Sectors and Presets

18
Each dome on your network is assigned a unique identifier (for example, CAM 001).
This is the dome address. You can show the dome address on the screen.
To show/hide the dome address:
• Select 2 Display Options
To change the location of the dome address on the screen:
1. Select 2 Display Options
2. Position the dome address on the screen by moving the controller joystick
up or down.
After you have programmed sectors and presets (see
Tours, Privacy Zones, and Sectors
and/or preset on the screen.
To show/hide the sector name:
• Select 2 Display Options
Note If the dome has overlapping sectors displaying at the same time, the
two sector names alternate on the screen at 1.5 second intervals.
To change the location of the sector name on the screen:
1. Select 2 Display Options
2. Position the sector name on the screen by moving the controller joystick up
or down.
To show/hide the preset name:
• Select 2 Display Options
 
1 Camera Msg ON or OFF (default)

6 Change Camera Name Loc.
on page 55), you can show the current sector
 
2 Sectors ON or OFF (default)

7 Change Sector Name Loc.
 
3 Preset Names ON or OFF (default)
Configuring Presets,