Configuring Alarms; Programming Alarms - Honeywell ACUIX User Manual

Configuring Alarms

Programming Alarms

Document 800-05662V1 Rev A
04/11
This chapter contains the following sections:
• Programming Alarms, page
• Setting Alarm Conditions, page
• Setting Automatic Acknowledgment
• Setting Alarm Messages, page
• Setting Alarm Overwrite and Overwrite
You can program up to four alarm inputs. The input contacts are sampled 16
times per second. When an alarm is activated, the dome performs the function
configured for the alarm (such as go to preset or run mimic tour).
To program an alarm input:
1. Select 3 Control Options
2. Select the alarm input you want to program (1-4).
3. In the Function (FUN) column, select one of the following:
• P = preset (normal or advanced)
• V = preset tour
• T = mimic tour
• N = night mode
• D = day mode
Note If night mode (N) or day mode (D) is selected, the cursor moves
directly to the Enabled column.
51
52
Properties, page
53
Time, page
 
3 Program Alarms
8
52
53
1 Program Alarms.
51