break-time specifies the number of seconds to break between two bursts of ring tone,
such as b=2.5
total-time specifies the total number of seconds to play the ring tone before it times out
• Example 1: SIT Tone
• n=Classic-1,w=3;c=1
• n=Simple-1,w=2;c=1
Call Progress Tones
Call Progress Tones parameters define the level, frequency and cadence of the dial, ringing and
call progress tones played by the phones. Each country has a defined standard level, frequency
and cadence for majority of the tones.
Call Progress Tones Notes
The default values provided correspond to US tones standard.
tones, see
"Call Progress Tones" section on page
Linksys SPA9x2 Phone Administration Guide
Setting Regional Parameters
For definitions of all call progress
141.
Call Progress Tones
67