Rtp Parameters - Linksys SPA922 Administrator's Manual

Parameter
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC

RTP Parameters

Parameter
RTP Port Min
RTP Port Max
RTP Packet SizeSPA901
Max RTP ICMP Err
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
SIP response status code to INVITE on which to play the
SIT2 Tone.
Defaults to blank.
SIP response status code to INVITE on which to play the
SIT3 Tone.
Defaults to blank.
SIP response status code to INVITE on which to play the
SIT4 Tone.
Defaults to blank.
SIP response code that retries a backup server for the
current request.
Defaults to blank.
Interval to wait before the SPA9x2 retries registration
after failing during the last registration.
Defaults to blank.
Description
Minimum port number for RTP transmission and
reception. <RTP Port Min> and <RTP Port Max> should
define a range that contains at least 4 even number
ports, such as 100 – 106.
Defaults to 16384.
Maximum port number for RTP transmission and
reception.
Defaults to 16482.
Packet size in seconds, which can range from 0.01 to
0.16. Valid values must be a multiple of 0.01 seconds.
Defaults to 0.030.
Number of successive ICMP errors allowed when
transmitting RTP packets to the peer before the SPA9x2
terminates the call. If value is set to 0, the SPA9x2 ignores
the limit on ICMP errors.
Defaults to 0.
Cisco Confidential--First Draft
SIP Tab
135