Setting Up The Spa932 Sidecar; Chapter 10: Using The Spa932 Sidecar - Linksys SPA922 Administrator's Manual

)
The following table describes SPA932 LED colors.
.
Port/LED
AUX IN
AUX OUT
Green
Red
Blinking Red
Orange
Off

Setting Up the SPA932 Sidecar

To configure the server to use the SPA932, configure each extension that will be monitored
by the SPA932. The SPA932 is a SIP subscriber in relation to each SIP proxy server, which
allows the SPA932 to receive NOTIFY messages from the SIP proxy that indicate the status of
each monitored phone. In general, the SIP proxy is identified by its IP address, or through a
hostname if DNS is configured. The way in which each phone and extension is identified is
vendor-specific.
To set up the SPA932 sidecar:
Linksys SPA9x2 Phone Administration Guide
Using the SPA932 Sidecar
Meaning
Connects to the SPA962
Connects to a second SPA932 unit (optional)
Idle
In-use
Ringing
Solid: not registered. Blinking: configuration error.
Not configured
Setting Up the SPA932 Sidecar
114