Optional Network Configuration - Linksys SPA922 Administrator's Manual

Optional Network Configuration

Parameter
Host Name
Domain
Primary DNS
Secondary DNS
DNS Server Order
DNS Query Mode
Syslog Server
Debug Server
Debug Level
Primary NTP Server
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
The host name of the SPA9x2.
The network domain of the SPA9x2.
DNS server used by SPA9x2 in addition to DHCP supplied
DNS servers if DHCP is enabled; when DHCP is disabled,
this is the primary DNS server.
Defaults to 0.0.0.0.
DNS server used by SPA9x2 in addition to DHCP supplied
DNS servers if DHCP is enabled; when DHCP is disabled,
this is the secondary DNS server.
Defaults to 0.0.0.0.
Specifies the method for selecting the DNS server. The
options are Manual, Manual/DHCP, and DHCP/Manual.
Do parallel or sequential DNS Query. With parallel
DNS query mode, the SPA9x2 sends the same request to
all the DNS servers at the same time when doing a DNS
lookup, the first incoming reply is accepted by the
SPA9x2.
Defaults to parallel.
Specify the syslog server name and port. This feature
specifies the server for logging SPA9x2 system
information and critical events. If both Debug Server and
Syslog Server are specified, Syslog messages are also
logged to the Debug Server.
The debug server name and port. This feature specifies
the server for logging SPA9x2 debug information. The
level of detailed output depends on the debug level
parameter setting.
The debug level from 0-3. The higher the level, the more
debug information is generated. Zero (0) means no
debug information is generated. To log SIP messages,
you must set the Debug Level to at least 2.
Defaults to 0.
IP address or name of primary NTP server.
Cisco Confidential--First Draft
System Tab
129