Provisioning Tab; Regional Tab; Call Progress Tones - Linksys SPA922 Administrator's Manual

Parameter
Multicast Address
Force LAN Codec

Provisioning Tab

For information about the Provisioning page, see the Linksys SPA Provisioning Guide.

Regional Tab

This section describes the fields for the following headings on the Regional tab:
• Call Progress Tones, page -141
• Distinctive Ring Patterns, page -144
• Control Timer Values (sec), page -145
• Vertical Service Activation Codes, page -145
• Vertical Service Activation Codes, page -145
• Outbound Call Codec Selection Codes, page -151
• Miscellaneous, page -153

Call Progress Tones

Parameter
Dial Tone
Outside Dial Tone
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
The multicast address is used by the SPA9000 to
communicate with the Linksys IP IP phones.
Defaults to 224.168.168.168:6061.
The choices are: none, G.711u, or G.711a. Defaults to
none.
Description
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Cisco Confidential--First Draft
Provisioning Tab
141