Roadmap To Web Ui Features - Linksys SPA922 Administrator's Manual

Roadmap to Web UI Features

The following tables provide a roadmap to features available on the web UI.
To perform these tasks...
View phone phone, extension, and line/call information
such, including:
• DHCP, current IP address, DNS addresses
• software and hardware versions
• broadcast, RTP, and SIP information
• registration state
• packets sent, received, lost, and so on
Configure system-level parameters, including network and
debug parameters. To:
• enable the web UI and web administrator access
• set the Internet connection type to DHCP
• configure the syslog and debug servers
• enable VLAN and CDP
Configure parameters to adjust SIP stack and protocols. To
enable:
• CTI
• SIP-B
• STUN
Linksys SPA9x2 Administration Guide
Getting Started
Roadmap to Web UI Features
On the web UI, click the ...
Info tab
"Obtaining Phone Information
See
(Info Tab)" section on page 27
System tab
Chapter 3, "Setting System
See
Features."
SIP tab
Chapter 4, "Setting SIP
See
Parameters."
.
25