Parameter
Unit 1 Key 1-32
Monitoring the SPA932
To display the status of the SPA932, click the SPA932 Status link on the SPA932 tab. The status of
each sidecar attached (Unit 1 and Unit 2) is shown. Parameters are read-only.
SPA932 Unit Monitoring Notes
The following table describes each parameter; both units display the same parameters.
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Linksys SPA9x2 Phone Administration Guide
Using the SPA932 Sidecar
Description
Enter a strings that define the extension and other parameters
associated with each lighted button on the first SPA932 unit.
Keywords and values are case-sensitive. The configuration
"Unit/Key Configuration Scripts"
script is described in
section on page 118.
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After the
subscription expires, the SPA932 automatically requests a new
subscription.
Displays the version of the hardware.
Displays whether the unit is connected or not.
Displays the length of time the SPA932 waits to try again if
subscription fails.
Displays the version of the software currently running on the
unit.
Displays the name assigned to each key (1-32) on the SPA932
sidecar unit.
Displays the function enabled for each key (1-32) on the
SPA932 sidecar unit.
Monitoring the SPA932
121