Linksys SPA922 Administrator's Manual page 126

Subsequent keys will use the same extension. See
page 120.
Assign SPA932 LEDs to SPA962 extensions.
By default, all 32 keys on the SPA932 are assigned to the first extension on the 962
(extension 101 based on the default multicast autoconfiguration).
To limit the number of LEDs assigned to the first extension, use the vid=1 keyword. Then
use the vid=2 keyword to assign the next set of keys to the second extension. The numeric
values correspond to the default extensions on the SPA962 as follows:
• vid=1—extension 101
• vid=2—extension 102
• vid=3—extension 103
• vid=4—extension 104
• vid=5—extension 105
• vid=6—extension 106
SPA9000 Syntax
Find more complete information in the
The following entry enables speed dialing, BLF monitoring, and call pick up on a SPA9000
server with:
• IP address 192.168.1.101
• station name phone1
• extension 101
• SPA932 unit/key using the SPA962's extension 2
fnc=sd+blf+cp;sub=phone1@$PROXY;usr=101@$PROXY;nme=phone1;vid=2
Broadsoft syntax
For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a Broadsoft server with
the IP address 192.168.100.1:
fnc=sd+blf;sub=marketing@;usr=reception@192.168.100.1
Linksys SPA9x2 Phone Administration Guide
Using the SPA932 Sidecar
Setting Up the SPA932 Sidecar
"SPA932 Parameter Notes" section on
Linksys Voice System Installation and Configuration Guide.
119