Chapter 2: Getting Started; Determining Spa9X2 Firmware Version - Linksys SPA922 Administrator's Manual

2
Getting Started
Read this chapter to learn about:
• "Determining SPA9x2 Firmware Version" section on page 16
• "Downloading the Firmware" section on page 17
• "Upgrading SPA9x2 Firmware" section on page 17
• "Using the Phone Display and Buttons" section on page 18
• "Using the LCD Screen" section on page 20
• "Using the Web User Interface" section on page 20
• "Using the Personal Directory" section on page 23
• "Viewing Call History" section on page 24
• "Web Admin Tabs" section on page 24
• "Roadmap to Web UI Features" section on page 25
From there you can begin using the web UI to view and change phone, extension, and user
information.
• "Obtaining Phone Information (Info Tab)" section on page 27
• "System and Product Information" section on page 28
• "Phone Status Information" section on page 29
• "Understanding Lines, Calls, and Shared Call Appearances" section on page 29
• "Extension Status Information" section on page 31
• "Line and Call Status Information" section on page 32
• "Downloaded Ring Tones" section on page 33
• "What's Next?" section on page 33

Determining SPA9x2 Firmware Version

Perform the following steps to determine the phone's current firmware version:
1. Press the Menu button on the phone.
2. Press 10, or scroll down until Product Info is highlighted and then press the select soft key.
3. Press 3 from the Product Info menu or scroll down to highlight Software Version and press
the select soft key.
Linksys SPA9x2 Administration Guide
Getting Started
Determining SPA9x2 Firmware Version
16