Line /Call Status - Linksys SPA922 Administrator's Manual

Parameter
Next Registration In
Message Waiting
Mapped SIP Port
)

Line /Call Status

Parameter
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Peer Name
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Decode Latency
Jitter
Rount Trip Dealy
Packets Lost
Packet Error
Mapped RTP Port
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
Number of seconds before the next registration renewal.
Indicates whether you have new voicemail waiting: Yes or No.
This is updated when voicemail notification is received.
Port number of the SIP port mapped by NAT.
Description
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end has placed the call on hold.
Indicates whether the call was triggered by a call back request.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Number of milliseconds for delay.
Number of packets lost.
Number of invalid packets received.
The port mapped for Real Time Protocol traffic for the call.
Cisco Confidential--First Draft
Info Tab
126