Chapter 4: Setting Sip Parameters - Linksys SPA922 Administrator's Manual

4
Setting SIP Parameters
Use the SIP tab to set SIP, RTP, SDP, NAT and Linksys key system parameters. This chapter
discusses:
• "SIP Parameters" section on page 45
• "SIP Timer Values" section on page 48
• "Response Status Code Handling" section on page 50
• "RTP Parameters" section on page 51
• "SDP Payload Types" section on page 52
• "SDP Payload Parameters" section on page 52
• "NAT Support Parameters" section on page 52
• "Linksys Key System Parameters" section on page 53
SIP Parameters
Use this section to configure various SIP parameters, including enabling CTI.
Linksys SPA9x2 Phone Administration Guide
Setting SIP Parameters
SIP Parameters
45