Line Key - Linksys SPA922 Administrator's Manual

Parameter
Screen Saver Enable
Screen Saver Wait
Screen Saver Icon

Line Key

When used in the configuration profile, parameters in this section must be appended with n,
where n represents line 1, 2, 3, 4, 5 or 6. For more information on these parameters, see
Key Notes" section on page
Parameter
Extension
Short Name
Share Call Appearance
Linksys SPA9x2 Phone Administration Guide
SPA9x2 Phone Field Reference
Description
Enables a screen saver on the phone's LCD. When the phone is
idle for a specified time, it enters screen saver mode. (Users
can set up screen savers directly using phone Setup button.)
Any button press or on/off hook event triggers the phone to
return to its normal mode. (The screen shows "Press any key to
unlock your phone. " )
If a user password is set, the user must enter it to exit screen
saver mode.
Amount of idle time before screen saver displays.
In screen saver mode, the phone LCD can display:
A background picture.
The station time in the middle of the screen.
A moving padlock icon. When the phone is locked, the status
line displays a scrolling message "Press any key to unlock your
phone."
A moving phone icon.
The station date and time in the middle of the screeen.
86.
Description
Extension number of the line key.
A short label shown on the LCD display for line key 1
through line key 6.
Yes indicates that Line Key 1/2/3/4/5/6 is a shared call
appearance. Otherwise this call appearance is not shared
(in other words it is private).
Defaults to no.
Cisco Confidential--First Draft
Phone Tab
"Line
157