Chapter 8: Customizing Spa9X2 Extensions; Downloaded Ring Tones" Section; What's Next?" Section; Ring Tone Notes - Linksys SPA922 Administrator's Manual

• Peer Name and Peer Phone: Name and phone number of the other side of the call.
• Duration: Duration of the call.
• Decode Latency: Number of milliseconds for decoder latency.
• Jitter: Number of milliseconds for receiver jitter.
• Round Trip Delay: Number of milliseconds for delay.
• Packet Error: Number of invalid packets received. Any number other than 0 indicates a
problem, most likely out of order packets.
• Mapped RTP Port: The port mapped for Real Time Protocol traffic for the call.
• Media Loopback: If the call is a loopback call, displays the loopback mode (source or
mirror) and type (media or packet). If the call is not loopback, the field appears blank.
For more line and extension information see,
Downloaded Ring Tones

Ring Tone Notes

• Status: Indicates if the phone is currently downloading a ring tone (and from where) or if
it is idle.
• Ring Tone 1: Information about downloaded ring tone 1: name, size, and time-stamp of
the tone.
• Ring Tone 2: Information about downloaded ring tone 2: name, size, and time-stamp of
the tone.

For more information about downloading ring tones, see:

www.linksys.com/support
What's Next?
Next you'll begin configuring the system, provisioning users, and customizing phones and
extensions. The admininstration web server lets you perform all necessary tasks remotely or
on site.
Linksys SPA9x2 Administration Guide
Getting Started
Downloaded Ring Tones
Chapter 8, "Customizing SPA9x2 Extensions.".
33