Regional Tab; Call Progress Tones - Linksys 900 Series Administrator's Manual

Regional Tab

Regional Tab
This section describes the fields for the following headings on the Regional tab:
•
•
•
•
•
•

Call Progress Tones

Field
Dial Tone
Second Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Confirm Tone
Linksys 900 Series IP Phone Administrator Guide
5-18
Call Progress Tones, page 5-18
Distinctive Ring Patterns, page 5-19
Control Timer Values (sec), page 5-21
Vertical Service Activation Codes, page 5-21
Outbound Call Codec Selection Codes, page 5-26
Miscellaneous, page 5-27
Description
Prompts the user to enter a phone number. Reorder Tone is played automatically when
<Dial Tone> or any of its alternatives times out.
The default is 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone when the user dials a three-way call.
The default is 420@-19,520@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter an external phone number, as
opposed to an internal extension. It is triggered by a, (comma) character encountered in
the dial plan.
The default is 420@-19;10(*/0/1).
Prompts the user to enter a call forwarding phone number.
The default is 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound call.
The default is 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far end hangs up during an established
call. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives
times out.
The default is 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed the handset on the cradle.
Warning Tone is played when Reorder Tone times out.
The default is 480@10,620@0;10(.125/.125/1+2).
Played during an outbound call when the far end is ringing.
The default is 440@-19,480@-19;*(2/4/1+2).
Brief tone to notify the user that the last input value has been accepted.
The default is 600@-16; 1(.25/.25/1).
Chapter 5 900 Series phone Field Reference
Off Hook
Document Version 3.1